Hot CPU Tester Pro 4.4.1 For Pc Free Download

The program puts your hardware components through extreme paces to test their reliability and stability. The System Info reports include details about the processor, CPU string, clock speed, and physical and virtual memory. It capably performs burn-in, benchmarking, and numerous diagnostics, including Complete Matrix, Sorting Algorithms, and Prime Test, but some trials are not available in this Lite version.

Hot CPU Tester Pro Full Version Registration key

Putting all hardware components to the test

This application can be used for running stress-tests on practically every hardware component, including the CPU, the memory (including cache), the chipset along with the motherboard, the system bus and the connected hard drives.

Long, thorough system analysis

Hot CPU Tester Pro license Key comes with a set of tests that can be run on your system in order to check its health. Performing a complete diagnostics test takes about 6 hours, but the results are meant to tell you whether the hardware is in good shape or help you decide what component should be soon replaced. The application is fully compatible with the x64 instruction set and provides support for multi-processor configurations, dual-core and multi-threaded CPUs.

It has a simple and user-friendly interface that allows us to perform several functions. First, with the Diagnostic option, the program executes a comprehensive “stress test”; that is, it makes the different parts of the system run under extreme conditions. If any of the parts can’t pass this test, it can be considered as the weakest link, thus allowing us to repair or change that part. The program also lets us to establish a benchmark against which all the data will be compared. Thus, any data falling under or above that benchmark will be considered as a warning signal.

Hot CPU Tester Pro Features:

  • Useful
  • Reasonably priced
  • None found
  • Errors on my Vista on start up of program. Has to install and run in Windows. Can’t use it to boot to CD and test hardware outside of Windows.
  • disappointing – to much crap with download
  • I would not really call them cons but wants. I would like to see more detailed info on say the manufacture and revision of more components and little things like code name, technology, cpuid. The only other thing would be some doccumentation. As I said though these are more wants than cons.
  • not ready for prime time
  • Not Applicable
  • never again
Hot CPU Tester Pro full version with crack and keygen

A reliable solution to having all hardware components safely put to heavy-duty test cases to check their health status with this practical application Many times, the damages suffered by our systems are caused by problems that could have been prevented, such as hardware errors or malfunctions. This program allows us to monitor our CPU and related hardware so we can detect any damage in a timely manner.

System Requirements for Hot CPU Tester Pro 4.4.1:

New in Hot CPU Tester Pro 4.4.1:

Improved support for Windows Vista
Improved support for the newer Intel processrs:
Intel Xeon (Codename: Penryn)
Intel Core 2 Extreme (Codename: Yorkfield)
Intel Core 2 Quad (Codename: Yorkfield)
Intel Core 2 Duo (Codename: Wolfdale)
Improved support for the following AMD? processrs:
Atlon 64 X2(Codename: Windsor)
Atlon 64 FX (Codename: Windsor)
Atlon 64 (Codename: Orleans)
Sempron (Codename: Manila)
Improved Hard Disk module test to detect SATA controller problems faster now
Fixed a bug that caused memory burn-in to crash
Due to 32bit limitations amount of memory to be tested is set below 4GB only
Small cosmetic changes
Updated DefectTrack engine(V2.2.0) for the new generation of processors
Added a new code path for Intel Core microarchitecture
Added a new code path for AMD Athlon 64 X2 and AMD Athlon 64 FX
Added SSE3 test module(Combined with SSE2)
Improved Chipset test module for the new generation of chipsets

Hot CPU Tester Pro 4.4 setup, Hot CPU Tester Pro 4.3 activator

13 thoughts on “Hot CPU Tester Pro 4.4.1 For Pc Free Download

  • 26.01.2021 at 09:04
    Permalink

    It advertises all the time! Lots of false alerts.

    Reply
  • 30.01.2021 at 11:52
    Permalink

    I am not very technical in the sense that I can rarely sense errors in the PC; not until my PC shows signs of freezing, hanging, sudden shut downs etc. This has happened in the past and when it recently happened again; my friend suggested that I should take the help of proficient technicians who could do monitoring, diagnosing and troubleshooting chores for me. I got through iYogi and I am really happy to have Support Dock now installed on my PC. This is a simple PC optimizing tool that is easy to use and efficient. iYyogi technicians are helpful and provide me with remote tech support as and when I need.

    Reply
  • 02.02.2021 at 01:37
    Permalink

    Can not think of any.

    Reply
  • 19.02.2021 at 04:17
    Permalink

    I can think of none

    Reply
  • 22.02.2021 at 11:32
    Permalink

    Dose not have any that I found

    Reply
  • 04.03.2021 at 12:22
    Permalink

    It works! If you don’t believe it, just watch the activity charts and compare to cattle grazing or resting.

    Reply
  • 07.03.2021 at 03:33
    Permalink

    Well, as I said, no need to be a god to use Flash Designer. But some help would be welcome, and their help is the very bare minimum. Both online and in the program itself. No indication whatsoever on where to find scripting information if required. Hopefuly, they’ll fix that, and get their fifth star!

    Reply
  • 14.03.2021 at 02:27
    Permalink

    None love it use it with process explore as well and you are all set

    Reply
  • 19.03.2021 at 02:38
    Permalink

    You need to make sure you have .netframework 3.5 sp1 installed to run this app.

    Reply

Leave a Reply

Your email address will not be published. Required fields are marked *

*

code